Artnet LED strips DMX out problem

Im having some issues getting the right outputs to 3 soldered 5m LED strips. The total LEDs is 450 so that 1350 samples which I divide into 3 Universes. In the DMX out however I can only select a single Universe from the routing table. Any ideas appreciated!

Hey, you need to set the mode to be packet per sample and put the name of your routing table to the routing table parameter

Hey thanks! I updated the routing table, but changing to ’ packet per sample’ switches most of the LEDs off and the Chop to rapidly flicker. (screenshot


attached). Any thoughts? Thank you!

Packet per channel is the correct one. You also might put a netaddress column and put the ip there.